Cambium Networks PTP 820 Series User Manual page 816

Chapter 17: Radio Configuration (CLI)
Table 171 MSE PMs (CLI)
Parameter Description
The number of the interval: 1-30 for daily PM reports, and 1-96 for 15 minute
Interval
PM reports.
Integrity Indicates whether the values received at the time and date of the measured
interval are reliable. "1" in the column indicates that the values are not
reliable due to a possible power surge or power failure that occurred at that
time.
Min MSE (dB) Indicates the minimum MSE in dB, measured during the interval.
Max MSE (dB) Indicates the maximum MSE in dB, measured during the interval.
Exceed Threshold Indicates the number of seconds the MSE exceeded the MSE PM threshold
Seconds during the interval.
Displaying ACM PMs (CLI)
To display ACM PMs in 15-minute intervals, enter the following command in radio view:
radio [x/x]>mrmc pm-acm show interval 15min
The following is a partial sample output of the modem pm-acm show interval 15min command:
radio [1/1]>mrmc pm-acm show interval 15min
MRMC PM Table:
==============
Interval Integrity Min profile Max profile Min bitrate Max bitrate
=============================================================================
===
0 1 0 0 43389 43389
1 1 0 0 43389 43389
2 1 0 0 43389 43389
3 1 0 0 43389 43389
4 1 0 0 43389 43389
5 1 0 0 43389 43389
6 1 0 0 43389 43389
7 1 0 0 43389 43389
8 1 0 0 43389 43389
9 1 0 0 43389 43389
10 1 0 0 43389 43389
radio [1/1]>
To display ACM PMs in daily intervals, enter the following command in radio view:
radio [x/x]>mrmc pm-acm show interval 24hr
The following is sample output of the modem pm-acm show interval 24hr
phn-3965_006v002
Page 17-27
Configuring and Viewing Radio PMs and Statistics (CLI)
command: