Cambium Networks PTP 820 Series User Manual page 406

Chapter 6: Ethernet Services and Interfaces
Table 68 Ethernet TX Port PMs
Parameter
Interval
Peak... Average... bytes...
Packets...
TX bytes Layer 1 exceed
threshold (sec)
Invalid data flag
To clear the PMs, click Clear All.
Enabling or Disabling Gathering of Port TX PM Statistics per Interface
To select the interfaces for which to gather and display Port TX PMs:
1. In the Ethernet Port TX PM Report page, click PM Admin. The Ethernet PM Port Admin page opens.
Definition
For 24-hour intervals, displays the date of the interval. For 15-minute
intervals, displays the date and ending time of the interval.
Various peak transmission rates (in seconds) and average transmission
rates (in seconds), both in bytes and in packets, for each measured time
interval.
The number of seconds the TX bytes exceeded the specified threshold
during the interval. For instructions on setting the threshold, see
the Ethernet Port TX Threshold.
Indicates whether the values received during the measured interval are
valid. An x in the column indicates that the values are not valid (for
example, because of a power surge or power failure that occurred during
the interval).
phn-3965_006v002
Page 6-35
Viewing Ethernet PMs and Statistics
Setting