Cambium Networks PTP 820 Series User Manual page 383

Chapter 6: Ethernet Services and Interfaces
Figure 193 Ethernet Service Points Page – Ingress Attributes
Table 64 Service Point Ingress Attributes
Parameter
Service point ID
Service point name
Service point type
Learning admin
Allow flooding
Allow broadcast
Definition
This ID is unique within the service. For Point-to-Point and Multipoint
services, the range of values is 1-32. For Management services, the range
of values is 1-30.
A descriptive name for the service point (optional). The Service Point
Name can be up to 20 characters.
The service point type. Options are:
•
SAP – Service Access Point.
•
SNP – Service Network Point.
•
MNG – Management service point.
•
PIPE – Pipe service point.
Determines whether MAC address learning for incoming frames is
enabled (Enable) or disabled (Disable). When enabled, the service point
learns the source MAC addresses of incoming frames and adds them to a
MAC address forwarding table.
Determines whether incoming frames with unknown MAC addresses are
forwarded to other service points via flooding. Select Allow to allow
flooding or Disable to disable flooding.
Indicates whether frames with a broadcast destination MAC address are
allowed to ingress the service via this service point.. Select Allow to allow
broadcast or Disable to disable broadcast.
phn-3965_006v002
Page 6-12
Configuring Ethernet Service(s)