Cambium Networks PTP 820 Series User Manual page 825

Chapter 18: Ethernet Services and Interfaces (CLI)
Parameter Input Type
sid Number
For example:
root> ethernet service show info sid 1
service-points info:
+----------+------------+------------+---------------------+-------------
----------+-------------+------------+-------
|Service ID|Service Type|List of SP's|Attached to Interface|Attached
Interface Type|Service Admin|STP Instance|SP name|
+----------+------------+------------+---------------------+-------------
----------+-------------+------------+-------
|1 |mp |sap \2 |rj45 1/2|dot1q |operational |0 | N.A. |
|1 |mp |snp \3 |radio 3/1|s-tag |operational |0 | N.A. |
+----------+------------+------------+---------------------+-------------
----------+-------------+------------+----- -+
root>
Configuring a Service's Operational State (CLI)
To change the operational state of a service, go to service view for the service and enter the following command:
service[SID]>service admin set <service admin mode>
Table 177 Ethernet Service Operational State CLI Parameters
Parameter Input Type
service admin Variable
mode
The following command sets Service 10 to be operational:
service[10]>service admin set operational
To display a service's admin mode, go to service view for the service and enter the following command:
Service[SID]> service admin show state
Permitted Values
Any defined Service ID.
Permitted Values Description
Operational The administrative state of the service:
reserved
operational
reserved
parameter is changed to
mode, the service occupies system resources but is
unable to receive and transmit data.
phn-3965_006v002
Page 18-6
Configuring Ethernet Services (CLI)
Default Description
None None
- The service is functional.
- The service is disabled until this
operational
. In this