Cambium Networks PTP 820 Series User Manual page 953

Chapter 20: Ethernet Protocols (CLI)
The following command sets a Notification Interval of 20 seconds:
root> ethernet lldp notif-interval-set notif-interval 20
Configuring LLDP Port Parameters (CLI)
To define how the LLDP agent operates on a specific port, enter the following command in root view:
root> ethernet lldp agent-admin-set interface eth slot <slot> port <port>
agent-admin <agent-admin>
To enable or disable LLDP notifications to the NMS on a specific port, enter the following command in root view:
root> ethernet lldp agent-notif-enable interface eth slot <slot> port
<port> agent-notif-enable <agent-notif-enable>
To display the LLDP agent configuration on all ports, enter the following command in root view:
root> ethernet lldp agent-configuration-show
The following is a sample output of the ethernet lldp agent-configuration-show command:
Table 276 LLDP Port CLI Parameters
Parameter Input Type
slot Number
port Number
Permitted Values Description
1
1-6 The port for which you want to
configure LLDP.
phn-3965_006v002
Page 20-30
Configuring LLDP (CLI)