Cambium Networks PTP 820 Series User Manual page 762

Chapter 16: Unit Management (CLI)
The following command sets the default gateway of the remote radio as 192.168.1.20:
radio[2/1]>remote-unit set default-gateway IP 192.168.1.20
The following commands set the IP address of the remote radio as 192.168.1.1, with a subnet mask of
255.255.255.255.
radio[2/2]>remote-unit set ip-address 192.168.1.1
radio[2/2]>remote-unit set subnet-mask IP 255.255.255.255
Configuring the Remote Radio's IP Address in IPv6 format (CLI)
To configure the remote radio's default gateway, enter the following command in radio view:
radio[x/x]>remote-unit set default-gateway-ipv6 IPv6 <ipv6-address>
To display the remote radio's default gateway, enter the following command in radio view:
radio[x/x]>remote-unit show default-gateway-ipv6
To set the remote radio's IP Address, enter the following command in radio view:
radio[x/x]>remote-unit set ip-address-ipv6 <ipv6-address>
To display the remote radio's IP Address, enter the following command in radio view:
radio[x/x]>remote-unit show ip-address-ipv6
To set the remote radio's prefix length , enter the following command in radio view:
radio[x/x]>remote-unit set prefix-length <prefix-length >
To display the remote radio's prefix-length , enter the following command in radio view:
radio[x/x]>remote-unit show prefix-length
Table 148 Remote Unit IP Address (IPv6) CLI Parameters
Parameter Input Type
ipv6-address Eight groups of four
hexadecimal digits
separated by colons.
prefix-length Number
The following command sets the default gateway of the remote radio as
FE80:0000:0000:0000:0202:B3FF:FE1E:8329 :
radio[2/1]>remote-unit set default-gateway-ipv6 IPv6
FE80:0000:0000:0000:0202:B3FF:FE1E:8329
The following commands set the IP address of the remote radio as FE80:0000:0000:0000:0202:B3FF:FE1E:8329,
with a prefix length of 64:
radio[2/2]>remote-unit set ip-address-ipv6
FE80:0000:0000:0000:0202:B3FF:FE1E:8329
Permitted Values
Any valid IPv6 address.
1-128
phn-3965_006v002
Page 16-4
Configuring the Remote Unit's IP Address (CLI)
Description
Sets the default gateway or IP
address of the remote radio.
Sets the prefix length of the
remote radio.