Chapter 6: Ethernet Services and Interfaces
Parameter
RX bytes Layer 1 exceed
threshold (sec)
Invalid data flag
To clear the PMs, click Clear All.
Definition
The number of seconds the RX bytes exceeded the specified threshold
during the interval. For instructions on setting the threshold, see
the Ethernet Port RX
Threshold.
Indicates whether the values received during the measured interval are
valid. An x in the column indicates that the values are not valid (for
example, because of a power surge or power failure that occurred during
the interval).
phn-3965_006v002
Page 6-38
Viewing Ethernet PMs and Statistics
Setting