Cambium Networks PTP 820 Series User Manual page 576

Chapter 9: TDM Services and Interfaces
Figure 336 PseudoWire Services – Add Page
2 Configure the pseudowire service parameters, described in
3 Click Apply, then Close.
Editing a Pseudowire TDM Service
To edit a pseudowire service:
1 Select the service you want to edit.
2 Click Edit. The PseudoWire Services – Edit page opens. You can edit any of the service parameters you can
configure when you add a service except the Service ID field.
3 Edit the service parameters, as described above.
4 Click Apply, then Close.
Viewing the Status of a Pseudowire TDM Service
To view the operational status of a service and the service's statistics:
1 Select the service you want to view.
2 Click Service Status. The PseudoWire Services – Information page opens.
Configuring Advanced Pseudowire Parameters
Table 109.
phn-3965_006v002
Page 9-68