Cambium Networks PTP 820 Series User Manual page 978

Chapter 21: TDM Services and Interfaces (CLI)
root> pwe3
pwe3> pwe3 soam ma status show
====================================================
Slot Number: 1
Maintenance Association Id: 1
Remote MEP MAC Address: ff:ff:ff:ff:ff:ff
Defects:
rmep-ccm
====================================================
Slot Number: 1
Maintenance Association Id: 2
Remote MEP MAC Address: 0:a:25:0:32:ea
Defects:
no-alarm
====================================================
To display the status of a specific MA, enter the following command in pwe3 view:
pwe3> pwe3 soam ma status show slot <slot> id <id>
The following is an example of a pwe3 soam ma status show slot <slot> id <id> command and its output:
root> pwe3
pwe3> pwe3 soam ma status show slot 1 id 1
====================================================
Slot Number: 1
Maintenance Association Id: 1
Remote MEP MAC Address: ff:ff:ff:ff:ff:ff
Defects:
rmep-ccm
pwe3>
The following command creates MA 1 on the E1/DS1 interface. This MA includes a local MEP with ID 200 and a
remote MEP with ID 1. This MA will later be assigned to a TDM tunnel using C-Type VLAN 100:
pwe3> pwe3 soam ma add slot 1 id 1 name MA1 md-id 1 local-mep 200 remote-
mep 1 vlan-type c-type vid 100
phn-3965_006v002
Page 21-17
Configuring TDM Pseudowire Services (CLI)