Cambium Networks PTP 820 Series User Manual page 83

Chapter 1: Introduction
Configuring the Transmit (TX) Level (CLI)
To set the transmit (TX) level of a radio, enter the following command in radio view:
To display the maximum transmit (TX) level of a radio, enter the following command in radio
view:
Paramet
er
tx-level
The following command sets the TX level of fixed radio interface 1 to 10 dBm:
Configuring the Radio (MRMC) Script(s)
MRMC > Entering Radio View (CLI)
Symmetrical
To view and configure radio parameters, you must first enter the radio's view level in the CLI.
Scripts > FCC
Use the following command to enter a radio's view level:
The following command enters radio view for fixed radio interface 1:
The following prompt appears:
The following command enters radio view for fixed radio interface 2:
The following prompt appears:
The following command enters radio view for an RMC in expansion slot 3:
The following prompt appears:
radio[1/2]>rf set rx-frequency 12900000 local-remote
disable
radio[x/x]>rf set tx-level <tx-level>
radio[x/x]>rf show max-tx-level
Table: Transmit (TX) Level CLI Parameters
Input Permitted
Ty Values
p
e
Number -50-34
radio[1/1]>rf set tx-level 10
root> radio slot <slot> port <port>
root> radio slot 1 port 1
radio[1/1]>
root> radio slot 1 port 2
radio[1/2]>
root> radio slot 3 port 1
radio[3/1]>
phn-3965_006v002
Page 1-37
Reference Guide to Web EMS Menu Structure
Description
The desired TX signal level (TSL), in
dBm.