Cambium Networks PTP 820 Series User Manual page 156

Chapter 2: Getting Started
Figure 48 Security General Configuration Page
2 In the FIPS admin configuration field, select Enable.
3 Click Apply.
Note
Changing the FIPS configuration causes a unit
After enabling FIPS:
•
The MD5 option for SNMPv3 is blocked.
•
After any system reset, the length of time before users can log back into the system is longer than usual due to
FIPS-related self-testing.
reset..
phn-3965_006v002
Page 2-61
Operating in FIPS Mode