Chapter 9: TDM Services and Interfaces
Parameter
Maximum Jitter Buffer Count
Deleting a Pseudowire TDM Service
To delete a pseudowire TDM service:
1
Select the service you want to delete.
2
Select the service.
3
Click Edit, and set the Admin State of the service to Disable.
4
Click Apply, then Close.
5
Select the service.
6
Click Delete. The service is deleted.
Definition
The maximum jitter buffer usage registered for the previous second.
phn-3965_006v002
Page 9-70
Configuring Advanced Pseudowire Parameters