Cambium Networks PTP 820 Series User Manual page 818

Chapter 17: Radio Configuration (CLI)
radio[x/x]>modem set threshold-xpi-exceed threshold <threshold>
To display the currently configured XPI threshold, go to radio view and enter the following command:
radio[x/x]>modem show threshold-xpi-below
Table 173 XPI Threshold CLI Parameters
Parameter Input Type
threshold Number
To display XPI PMs in 15-minute intervals, go to radio view and enter the following command:
radio[x/x]>modem pm-xpi show interval 15min
The following is a partial sample output of the
radio [1/1]>modem pm-xpi show interval 15min
Modem XPI PM Table:
===================
Interval Integrity Min XPI (dB) Max XPI (dB) XPI below
threshold
seconds
=============================================================================
===
0 1 55.00 0.00 0
1 1 55.00 0.00 0
2 1 55.00 0.00 0
3 1 55.00 0.00 0
4 1 55.00 0.00 0
5 1 55.00 0.00 0
6 1 55.00 0.00 0
7 1 55.00 0.00 0
8 1 55.00 0.00 0
9 1 55.00 0.00 0
10 1 55.00 0.00 0
radio [1/1]>
To display XPI PMs in daily intervals, go to radio view and enter the following command:
radio[x/x]>modem pm-xpi show interval 24hr
The following is a partial sample output of the
Permitted Values Description
0-99 The XPI threshold.
modem pm-xpi show interval 15min
modem pm-xpi show interval 24hr
phn-3965_006v002
Page 17-29
Configuring and Viewing Radio PMs and Statistics (CLI)
command:
command: