Cambium Networks PTP 820 Series User Manual page 266

Chapter 3: Configuration Guide
11. When you have finished configuring the 1+1 HSB group, unmute both radio carriers on both sides of the link.
See Configuring the Radio
12. Optionally, you can enable revertive mode so that following a switchover, the system initiates a revertive
protection switchover back to the original receiver once proper link and/or equipment conditions are
restored. See Revertive
Configuring 1+1 HSB with Space Diversity
1. Create a Multi-Carrier ABC group with no members. For instructions, see
Group.
2. Enable protection for the Multi-Carrier ABC group:
i Select Radio > Groups > Multi Carrier ABC. The Multi Carrier ABC page opens
ii Select the group in the Multi-Carrier ABC table and click Edit Group. The Multi Carrier ABC - Edit page
opens.
Figure 118 Multi Carrier ABC Group – Edit Page – Enabling Protection
iii In the Protection field, select Enable.
iv Click Apply, then Close.
3. Create a 1+1 HSB-SD protection group:
i Select Radio > Groups > Radio Protection. The Radio Protection page opens
ii Click Create Group. The Create Radio Protection Group page opens.
Parameters.
Mode.
phn-3965_006v002
Page 3-108
Configuring HSB Radio Protection
Configuring a Multi-Carrier ABC
(Figure 93).
(Figure 114).