Cambium Networks PTP 820 Series User Manual page 976

Chapter 21: TDM Services and Interfaces (CLI)
This section includes:
•
Adding a Maintenance Domain (MD) (CLI)
•
Adding a Maintenance Association (MA) (CLI)
•
Enabling CCM Messages (CLI)
•
Assigning an MA to a TDM Tunnel (CLI)
•
Configuring a Pseudowire Tunnel Group (CLI)
•
Configuring a Network Edge Node in a Dual Homing Configuration (CLI)
Adding a Maintenance Domain (MD) (CLI)
You must define at least one MD. To define an MD, enter the following command in pwe3 view:
pwe3> pwe3 soam md add slot <slot> id <id> name <name> level <level>
The following command assigns MD 1 to the E1/DS1 interface. The name of the MD is "test", and its MD level is 5:
pwe3> pwe3 soam md add slot 1 id 1 name test level 5
Table 282 Pseudowire OEM MD CLI Parameters
Parameter Input Type
slot Number
id Number
name Text String
level Number
Permitted Values Description
1
1-8 An ID that identifies the MD. This ID is
unique per slot.
Assigns a name to the MD, for
informational purposes.
1-7 The maintenance level of the MD. The
maintenance level ensures that the CFM
frames for each domain do not interfere
with each other. Where domains are
nested, the encompassing domain must
have a higher level than the domain it
encloses. The maintenance level is
carried in all CFM frames that relate to
that domain.
phn-3965_006v002
Page 21-15
Configuring TDM Pseudowire Services (CLI)