Cambium Networks PTP 820 Series User Manual page 932

Chapter 20: Ethernet Protocols (CLI)
To display detailed information about a specific ERPI, enter the following command in root view:
root> ethernet g8032 show-erpi-config erpi-id <erpi-id>
The following command displays detailed output for ERPI 1:
root> ethernet g8032 show-erpi-config erpi-id 1
The following is an example of this command's output.
To display state information about a specific ERPI, enter the following command in root view:
root> ethernet g8032 show-erpi-dynamic erpi-id <erpi-id>
The following command displays detailed output for ERPI 1:
root> ethernet g8032 show-erpi-dynamic erpi-id 1
The following is an example of this command's output.
Table 262 G.8032 ERPI Display Command Input Parameters
Parameter Input Type
interface Variable
Permitted Values Description
eth
Enter the type of interface:
radio
– Ethernet
eth
pwe
radio
– TDM
pwe
phn-3965_006v002
Page 20-9
– Radio
Configuring G.8032 (CLI)