Cambium Networks PTP 820 Series User Manual page 824

Chapter 18: Ethernet Services and Interfaces (CLI)
service[1]>service info show
service info:
service id: 1
service type: p2p
service admin: operational
Maximal MAC address learning entries: 131072
default cos: 0
cos mode: preserve-sp-cos-decision
EVC id: N.A.
EVC description: N.A.
split horizon group: disable
configured multicast grouping: no
service[1]>
To display the attributes of a service and its service points, go to service view for the service and enter the
following command:
service[SID]>service detailed-info show
For example:
service[1]>service detailed-info show
service info:
service id: 1
service type: mp
service admin: operational
Maximal MAC address learning entries: 131072
default cos: 0
cos mode: preserve-sp-cos-decision
EVC id: N.A.
EVC description: N.A.
split horizon group: disable
configured multicast grouping: no
service-points info:
+----------+------------+------------+---------------------+-------------
----------+-------------+------------+-------
|Service ID|Service Type|List of SP's|Attached to Interface|Attached
Interface Type|Service Admin|STP Instance|SP name|
+----------+------------+------------+---------------------+-------------
----------+-------------+------------+-------
|1 |mp |sap \2 |rj45 1/2|dot1q |operational |0 | N.A. |
|1 |mp |snp \3 |radio 3/1|s-tag |operational |0 | N.A. |
+----------+------------+------------+---------------------+-------------
----------+-------------+------------+----- -+
service[1]>
To display a list of service points and their attributes, enter the following command in root view:
root>ethernet service show info sid <sid>
Table 176 Displaying Ethernet Service Details CLI Parameters
phn-3965_006v002
Page 18-5
Configuring Ethernet Services (CLI)