Chapter 8: Ethernet Protocols
To display the unit's port parameters, as transmitted by the LLDP agents:
1.
Select Ethernet > Protocols > LLDP > Advanced > Local System > Port. The LLDP Local System Port page
opens.
Figure 286 LLDP Local System Port Page
Table 93
describes the parameters in the LLDP Local System Port page. These parameters are read-only.
Table 93 LLDP Local System Port Parameters
Parameter
Interface Location
Port ID
Port Sub Type
Port Description
Definition
Identifies the port.
The port's MAC address.
The type of encoding used to identify the port in LLDP transmissions. In
this release, this parameter is always set to MAC Address.
A description of the port.
phn-3965_006v002
Page 8-48
Configuring LLDP