Cambium Networks PTP 820 Series User Manual page 780

Chapter 16: Unit Management (CLI)
Table 153 Configuration Management CLI Parameters
Parameter Input Type
Dotted decimal
server-ipv4
format.
server-ipv6 Eight groups of
four hexadecimal
digits separated by
colons.
directory Text String
filename Text String
username Text String
password Text String
restore-point Variable
The following command configures the FTP channel for configuration file import and export to IP address
192.168.1.99, in the directory "current," with file name "version_8_backup.zip," user name "anonymous," and
password "12345."
root> platform configuration channel server set ip-address 192.168.1.99
directory \current filename version_8_backup.zip username anonymous
password 12345
The following commands save the current configuration as a configuration at Restore Point 1, and export the file to
the external server location:
Permitted Values
Any valid IPv4 address.
Any valid IPv6 address.
restore-point-1
restore-point-2
restore-point-3
phn-3965_006v002
Page 16-22
Backing Up and Restoring Configurations (CLI)
Description
The IPv4 address of the PC or laptop
you are using as the FTP server.
The IPv6 address of the PC or laptop
you are using as the FTP server.
The location of the file you are
downloading or uploading. If the
location is the root shared folder, it
should be left empty. If the location is
a sub-folder under the root shared
folder, specify the folder name. If the
shared folder is "C:\", this parameter
can be left empty or populated with
"//".
The name of the file you are importing,
or the name you want to give the file
you are exporting.
Note: You must add the suffix .zip to
the file name. Otherwise, the file
import may fail. You can export the file
using any name, then add the suffix
.zip manually.
The user name for the FTP session.
The password for the FTP session. To
configure the FTP settings without a
password, simply omit this parameter.
Identifies the restore point to or from
which to perform the backup
operation.