Cambium Networks PTP 820 Series User Manual page 150

Chapter 2: Getting Started
Figure 47 MRMC Symmetrical Scripts Page (Configuration – Adaptive Mode) PTP 820G
6 Define the script profile or profiles:
o
If you selected Fixed ACM mode, select the ACM profile in the MRMC Script profile field.
o
If you selected Adaptive ACM mode, select the maximum and minimum ACM profiles in the MRMC Script
maximum profile and the MRMC Script minimum profile fields.
See Table 27 PTP 820F Radio
configuring. For PT 820G, it also depends on whether you are configuring the MRMC script for a fixed
interface. For PTP 820F, it depends on whether you are using a Microwave RFU (RFU-D and RFU-S) or an
E-Band RFU (RFU-E).
o
PTP 820G: For fixed interfaces and RMC-B, up to 11 profiles (0-10) are available.
o
PTP 820F: For Microwave RFUs, up to 13 profiles (0-12) are available.
o PTP 820F: For RFU-E, up to 10 profiles (0-9) are available.
Note
Supported profiles differ per script and also may differ based on whether the script is configured for
Fixed or Adaptive mode. For details, refer to the Release Notes for the System Version you are using.
7 Click Apply.
Note
Changing the script resets the radio interface and affects traffic. Changing the maximum or minimum
profile does not reset the radio interface.
Configurations. The number of profiles depends on the type of unit you are
phn-3965_006v002
Page 2-55
Configuring the Radio (MRMC) Script(s)