General Cli Commands - Cambium Networks PTP 820 Series User Manual

Chapter 14: Getting Started (CLI)

General CLI Commands

To display all command levels available from your current level, press <TAB> twice. For example, if you press
<TAB> twice at the root level, the following is displayed:
root>
auto-state-propagation
platform
stm1oc3_rst
Some of these are complete commands, such as quit and exit. Others constitute the first word or phrase for a
series of commands, such as
Similarly, if you enter the word
follows platform is displayed:
root> platform
activation-key
security
sync
unit-info
root> platform
To auto-complete a command, press <TAB> once.
Use the up and down arrow keys to navigate through recent commands.
Use the ? key to display a list of useful commands and their definitions.
At the prompt, or at any point in entering a command, enter the word
commands. If you enter
help
part of a command, a list of commands that start with the portion of the command you have already entered is
displayed.
To scroll up and down a list, use the up and down arrow keys.
To end the list and return to the most recent prompt, press the letter
To ping another network device, enter one of the following commands in root view:
root> ping ipv4-address <x.x.x.x> count <number of echo packets> packet-size
<packet-size>
root> ping ipv6-address <ipv6> count <number of echo packets> packet-size
<packet-size>
The optional parameter determines how many packets are sent. This parameter can be an integer from 1 to
count
1000. The default value is 4.
The optional
packet-size
integer from 64 to 1480. The default value is 64.
The ping command is available from all views (e.g., root, interface views, group views).
ethernet
pwe3 quit
switch-back
.
and
ethernet radio
and press <TAB> twice, the first word or phrase of every command that
platform
configuration
shelf-manager
tdm-latency-optimization tdm-offset
unit-info-file
at the prompt, a list of all commands is displayed. If you enter
parameter determines the size of each packet, in bytes. This parameter can be an
phn-3965_006v002
Page 14-4
exit multi-carrier-abc
radio radio-groups
switch-to wait
if-manager
software
wtr-timer
to display a list of available
help
q .
General CLI Commands
management
status
tdm-range
after entering
help