Cambium Networks PTP 820 Series User Manual page 283

Chapter 4: Unit Management
Figure 131 V3 Users - Add Page
3. Configure the SNMP V3 Authentication parameters, as described below.
4. Click Apply, then Close.
Table 36 SNMP V3 Authentication Parameters
Parameter
User Name
Password
Authentication Algorithm
Encryption (Privacy) Mode
Access Mode
.
Definition
Enter the SNMPv3 user name.
Enter a password for SNMPv3 authentication. The
password must be at least eight characters.
Select an authentication algorithm for the user. Options
are:
•
None
•
SHA
•
MD5
Select an encryption (privacy) protocol for the user.
Options are:
•
None
•
DES
•
AES
Select an access permission level for the user. Options
are:
•
Read Write User
•
Read Only User
phn-3965_006v002
Page 4-8
Configuration SNMP