Cambium Networks PTP 820 Series User Manual page 669

Chapter 12: Alarm Management and Troubleshooting
Figure 406 Radio Loopbacks Page – PTP 820G
2. Select the slot on which you want to perform loopback and click Edit. The Radio Loopbacks – Edit page
opens.
Note
You cannot perform loopback directly on a Multi-Carrier ABC group. To perform traffic-level
diagnostics on a Multi-Carrier ABC group, the loopback must be activated for all members of the
group. Radio-level diagnostics can still be performed on individual members of the group.
Figure 407 Radio Loopbacks – Edit Page
3. In the Loopback timeout (minutes) field, enter the timeout, in minutes, for automatic termination of the
loopback (0-1440). A value of 0 indicates that there is no timeout.
phn-3965_006v002
Page 12-19
Performing Diagnostics