Cambium Networks PTP 820 Series User Manual page 368

Chapter 5: Radio Configuration
2. In the Interface field, select the radio interface that holds the radio for which you want to display PMs.
3. In the Interval Type field:
o
To display reports in 15-minute intervals, select 15 minutes.
o
To display reports in daily intervals, select 24 hours.
To set the thresholds for utilization PMs:
1. Select Threshold. The Utilization Threshold page opens.
Figure 187 Ethernet Radio Utilization Threshold Page
1. Enter the utilization threshold you want, in % (1-100). The default value for is 100.
2. Click Apply, then Close.
Table 59 describes the capacity and throughput PMs.
Configuring and Viewing Radio PMs and Statistics
phn-3965_006v002
Page 5-54