Chapter 3: Configuration Guide
10
Click Next. Page 3 of the 1+0 Quick Configuration wizard opens.
Figure 53 1+0 Quick Configuration Wizard (PTP 820G) – Page 3
Figure 54 1+0 Quick Configuration Wizard (PTP 820F) – Page 3
11
In the Script ID field, select the MRMC script you want to assign to the radio. For a full explanation of
choosing an MRMC script, see
To view
and configure radio parameters, you must first enter the radio's view level in the CLI.
Use the following command to enter a radio's view level:
root> radio slot <slot> port <port>
The following command enters radio view for fixed radio interface 1:
root> radio slot 1 port 1
The following prompt appears:
radio[1/1]>
The following command enters radio view for fixed radio interface 2:
root> radio slot 1 port 2
The following prompt appears:
radio[1/2]>
The following command enters radio view for an RMC in expansion slot 3:
Entering Radio View (CLI)
phn-3965_006v002
Page 3-8
Configuring a Link Using the Quick Configuration Wizard