Cambium Networks PTP 820 Series User Manual page 749

Chapter 15: Configuration Guide (CLI)
Parameter
RX State
Mux State
Mux Reason
Partner Oper Port
Partner Oper System
Priority
Partner Oper Key
Partner Oper System ID
Partner Oper Port
Priority
Displaying LACP Port Statistics (CLI)
To display LACP port statistics, go to interface view for the LAG and enter the following command:
eth group [lagx]> lacp show ports statistics
Definition
The state of the receive state machine for the Aggregation port.
Possible values are:
Current – An LACPDU was received before expiration of the most recent
timeout period.
Expired – No LACPDU was received before expiration of the most recent
timeout period.
Defaulted – No LACPDU was received during the two most recent
timeout periods.
The state of the Mux state machine for the Aggregation port. Possible
values are Collecting, Distributing, Attached, and Detached.
A text string indicating the reason for the most reason change in the state
of the Mux machine.
The operational port number assigned to this Aggregation port by the
Aggregation port's port Partner.
The operational value of priority associated with the Partner's System ID.
The current operational value of the Key for the protocol Partner.
The MAC Address value representing the current value of the
Aggregation Port's protocol Partner's System ID.
The Priority value assigned to this Aggregation port by the Partner.
phn-3965_006v002
Page 15-18
Configuring Link Aggregation (LAG) and LACP (CLI)