Chapter 9: TDM Services and Interfaces
Figure 306 Native TDM Services – Edit Page
You can edit the following parameters:
•
Trail Description - Optional. A text description of the trail.
•
Admin Status - Select Up to enable the trail or Down to disable the trail. For protected trails, you can select
Working Down or Protecting Down to disable only the working or only the protecting trail.
•
Switch Command - Used for protected trails to initiate a manual switchover. Select from the following
options:
o
No Action - No manual switchover is initiated.
o
Manual Switch - Initiates a manual switchover.
To implement the changes, click Apply, then Close.
phn-3965_006v002
Page 9-23
Configuring Native TDM Trails