Cambium Networks PTP 820 Series User Manual page 742

Chapter 15: Configuration Guide (CLI)
To remove a radio member interface from a LAG, go to interface view for the LAG and enter the following
command:
eth group [lagx]> port static-lag remove member interface radio slot
<slot> port <port>
To display the name of a LAG to which an interface belongs, go to interface view for the interface and enter the
following command:
eth type eth [x/x]> static-lag show name
To enter interface view for a LAG, enter the following command in root view:
root> ethernet interfaces group <lag1|lag2|lag3|lag4>
To display details about a LAG, go to interface view for the LAG: and enter the following command:
eth group [lagx]> summary show
To display a LAG's operational state, go to interface view for the LAG: and enter the following command:
eth group [lagx]> operational state show
To display a list of interfaces that belong to a LAG, go to interface view for the LAG and enter the following
command:
eth group [lagx]> port static-lag show members
The following commands create a LAG with the ID lag2. The LAG includes Ethernet ports 1, 2, and 3:
root> platform if-manager set interface-type ethernet slot 1 port 1 admin
down
root> platform if-manager set interface-type ethernet slot 1 port 2 admin
down
root> platform if-manager set interface-type ethernet slot 1 port 3 admin
down
root> ethernet interfaces eth slot 1 port 1
eth type eth [1/1]>
eth type eth [1/1]> static-lag add lagid lag2
eth type eth [1/1]> exit
root>
root> ethernet interfaces eth slot 1 port 2
eth type eth [1/2]>
eth type eth [1/2]> static-lag add lagid lag2
eth type eth [1/2]> exit
root>
root> ethernet interfaces eth slot 1 port 3
eth type eth [1/3]>
eth type eth [1/3]> static-lag add lagid lag2
eth type eth [1/3]> exit
root> platform if-manager set interface-type ethernet slot 1 port 1 admin
up
root> platform if-manager set interface-type ethernet slot 1 port 2 admin
up
root> platform if-manager set interface-type ethernet slot 1 port 3 admin
up
The following command displays the name of the LAG to which Ethernet port 1 belongs:
eth type eth [1/1]> static-lag show name
Static-lag group name: lag2
Configuring Link Aggregation (LAG) and LACP (CLI)
phn-3965_006v002
Page 15-11