Configuring Trap Managers - Cambium Networks PTP 820 Series User Manual

Chapter 4: Unit Management

Configuring Trap Managers

Configuring Trap Managers
You can configure trap forwarding parameters by editing the Trap Managers table. Each line in the Trap Managers
table displays the setup for a manager defined in the system.
To configure trap managers:
1. Select Platform > Management SNMP > Trap Managers. The Trap Managers page opens.
Figure 132 Trap Managers Page
2. Select a trap manager and click Edit. The Trap Managers Edit page opens.
phn-3965_006v002
Page 4-9