Cambium Networks PTP 820 Series User Manual page 382

Chapter 6: Ethernet Services and Interfaces
Parameter
S-Vlan encapsulation
Table 63 describes the available Attached Interface Types.
Table 63 Attached Interface Types
Attached Interface Type
dot1q
s-tag
Bundle-C
Bundle-S
All-to-One
Q-in-Q
Select Ingress in the Ethernet Service Points page to display the Ethernet Service Points – Ingress Attributes table.
Table 64 describes the parameters displayed in the Ingress SP Attributes table.
Definition
The S-VLAN classified into the service point. Options are 1-4094,
Untagged, or N.A. (Not Applicable). Once you have added the service
point, you cannot change this parameter.
If you selected Bundle-S in the Attached Interface Type field, select the S-
VLAN value to classify into the service point (1-4094), or select Untagged.
You can then add multiple C-VLANs via the Attach VLAN option. See
Attaching VLANs.
Types of Frames
A single C-VLAN is classified into the service
point.
A single S-VLAN is classified into the service
point.
A set of C-VLANs is classified into the service
point.
A single S-VLAN and a set of C-VLANs are
classified into the service point.
All C-VLANs and untagged frames that enter
the interface are classified into the service
point.
A single S-VLAN and C-VLAN combination is
classified into the service point.
b. Ethernet Service Points – Ingress Attributes
phn-3965_006v002
Page 6-11
Configuring Ethernet Service(s)
Available for Service
Point Types
All
SNP, PIPE, and MNG
SAP
SAP
SAP
SAP and MNG