Chapter 8: Ethernet Protocols
Table 74
lists and describes the parameters in the ERPI Attribute – State page.
Table 74 ERPI State Parameters
Parameter
ERPI Port
ERPI Port Active State
R-APS Channel Forwarding
State
ERPI Data Forwarding State
RPL Blocking State
ERPI Port Defect State
Definition
Identifies whether the row is for the West endpoint, the East endpoint, or a
Sub-Ring connection point.
Indicates whether or not the service point is active for traffic forwarding.
Indicates whether the service point is forwarding R-APS messages.
Indicates whether the service point is in unblocked (forwarding) state.
Only relevant if the ERPI to which the service point belongs is the RPL owner.
Indicates whether the service point is in blocked state.
Indicates whether the service point is in Signal Fail (SF) or Signal Defect (SD)
state.
Note:
Support for Signal Defect state is planned for future release.
phn-3965_006v002
Page 8-11
Configuring G.8032