Cambium Networks PTP 820 Series User Manual page 237

Chapter 3: Configuration Guide
Figure 95 Create ABC Group Wizard – Second Page
5. In the Member 1 field, select a radio carrier.
6. Click Next. The next page of the Create Group wizard opens.
7. In the Member 2 field, select a radio carrier.
8. Click Next. A summary page opens.
Figure 96 Create ABC Group Wizard – Finish Page
9. Click Submit, A message appears indicating whether or not the operation was successful.
10. Click Close to close the Create Group wizard. You must click Submit before clicking Close, or the selections
you made will be discarded and the process cancelled.
Adding and Removing Group Members
You can add and removeradio carriers from the group after creating the group. This is relevant, for example, if you
are configuring 1+1 HSB-SD, where you must first create an empty Multi-Carrier ABC group, then later add the 1+1
HSB-SD group to the empty Multi-Carrier ABC group. This is also relevant if you want to delete a Multi-Carrier ABC
group, since you must remove the members individually before deleting the group.
To add interfaces:
1. Select the group in the Multi-Carrier ABC table and click Add/Remove Members. The Multi Carrier ABC -
Add/Remove Members page opens.
phn-3965_006v002
Page 3-79
Configuring Multi-Carrier ABC