Cambium Networks PTP 820 Series User Manual page 973

Chapter 21: TDM Services and Interfaces (CLI)
Configuring Pseudowire Profiles (CLI)
Each TDM service must include a profile. The profile determines the behavior of the service, including the buffer,
payload suppression, and other parameters. A profile can be used by multiple services. You can configure up to 64
TDM profiles. TDM profile configuration must be performed from pwe3 view:
root> pwe3
pwe3>
To create and configure a TDM profile, use the following commands:
pwe3> pwe3 pw-profile add id <id>
pwe3> pwe3 pw-profile basic-params modify id <id> payload-size <payload-
size> jitter-buffer-depth <jitter-buffer-depth> payload-suppression
<payload-suppression>
phn-3965_006v002
Page 21-12
Configuring TDM Pseudowire Services (CLI)