Cambium Networks PTP 820 Series User Manual page 571

Chapter 9: TDM Services and Interfaces
1 In the PseudoWire Profiles page
Figure 334 PseudoWire Profiles – Add Page
2 Configure the pseudowire profile parameters, described in Table 108.
3 Click Apply, then Close.
Editing a Pseudowire Profile
To edit a pseudowire profile:
1 In the PseudoWire Profiles page
PseudoWire Profiles – Edit page opens.
2 Edit the pseudowire profile parameters, described in
configure when you add a profile except the Profile ID field.
3 Click Apply, then Close.
Deleting a Pseudowire Profile
To delete a pseudowire profile:
1 In the PseudoWire Profiles page
(Figure 333), click Add. The PseudoWire Profiles – Add page opens.
(Figure 333), select the profile you want to edit and click Edit. The
Table 108. You can edit any of the parameters you can
(Figure 333), select the profile you want to delete.
phn-3965_006v002
Page 9-63
Configuring Advanced Pseudowire Parameters