Cambium Networks PTP 820 Series User Manual page 575

Chapter 9: TDM Services and Interfaces
Parameter
Path Protection Mode
Adding a Pseudowire TDM Service
To add a pseudowire TDM service:
1 Click Add. The PseudoWire Services – Add page opens.
Definition
If you are creating a service with path protection, select Yes. If you are
creating a service without path protection, select No.
If you select Yes, the Tunnel ID must be the ID of a Tunnel Group. For
instructions on creating a tunnel group, see
phn-3965_006v002
Page 9-67
Configuring Advanced Pseudowire Parameters
Configuring a Tunnel Group.