Cambium Networks PTP 820 Series User Manual page 879

Chapter 19: Quality of Service (QoS) (CLI)
MPLS EXP bits
0
1
2
3
4
5
6
7
To modify the MPLS EXP bit classification table, enter the following command:
root> ethernet qos mpls-exp-bits-mapping-tbl set mpls-exp <mpls-exp> cos
<cos> color <color>
To display the MPLS EXP bit classification table, enter the following command:
root> ethernet qos mpls-mapping-tbl show
Table 225 MPLS EXP Bit Classification Table Modification CLI Parameters
Parameter Input Type
mpls-exp Number
cos Number
color Variable
The following command maps frames with MPLS EXP bit value of 4 to CoS 4 and Yellow color:
root> ethernet qos mpls-exp-bits-mapping-tbl set mpls-exp 4 cos 4 color
yellow
Configuring a Default CoS (CLI)
You can define a default CoS value for frames passing through the interface. This value can be overwritten on the
service point and service level. The Color is assumed to be Green.
To define a default CoS value for an interface, go to interface view for the interface and enter the following
command:
CoS (Configurable) Color (Configurable)
0 Yellow
1 Green
2 Yellow
3 Green
4 Yellow
5 Green
6 Green
7 Green
Permitted Values
0 – 7
0 – 7
green
yellow
phn-3965_006v002
Page 19-12
Description
The MPLS EXP bit to be mapped.
The CoS assigned to frames with the
designated MPLS EXP bit value.
The Color assigned to frames with the
designated MPLS EXP bit value.
Configuring Classification (CLI)