Chapter 11: Access Management and Security
Configuring the Session Timeout
By default, there is a 10 minute session timeout. If you do not perform any activity on the system for the period of
time defined as the session timeout, the user session times out and you will have to log in to the system again.
To modify the session timeout:
1.
Select Platform > Security > Protocols Control. The Protocols Control page opens.
Figure 358 Protocols Control Page
2.
In the Session timeout (Minutes) field, select a session timeout, in minutes, from 1 to 60.
3.
Click Apply.
phn-3965_006v002
Page 11-5
Configuring the Session Timeout