Cambium Networks PTP 820 Series User Manual page 370

Chapter 5: Radio Configuration
2. In the Interface field, select the radio interface that holds the radio for which you want to display PMs.
3. In the Interval Type field:
o
To display reports in 15-minute intervals, select 15 minutes.
o
To display reports in daily intervals, select 24 hours.
Table 60 describes the capacity and throughput PMs.
Note
To display the same parameters for a specific interval in a separate page, select the interval in the
PM table and click View.
Table 60 Frame Error Rate PMs
Parameter
Time interval index
FER
Integrity
Definition
For 24-hour intervals, displays the date of the interval. For 15-minute
intervals, displays the date and ending time of the interval.
Displays the frame error rate (%) during the measured time interval.
Indicates whether the values received at the time and date of the
measured interval are reliable. An x in the column indicates that the
values are not reliable due to a possible power surge or power failure that
occurred at that time.
phn-3965_006v002
Page 5-56
Configuring and Viewing Radio PMs and Statistics