Cambium Networks PTP 820 Series User Manual page 179

Chapter 3: Configuration Guide
Figure 61 1+0 Repeater Quick Configuration Wizard (PTP 820G) – Page 4
9. For each interface, configure the following MRMC script parameters. The red arrow points to the interface
you are configuring. For example, in
10. In the Script ID field, select the MRMC script you want to assign to the first radio. For a full explanation of
choosing an MRMC script, see Entering Radio View (CLI)
11. To view and configure radio parameters, you must first enter the radio's view level in the CLI.
Use the following command to enter a radio's view level:
root> radio slot <slot> port <port>
The following command enters radio view for fixed radio interface 1:
root> radio slot 1 port 1
The following prompt appears:
radio[1/1]>
The following command enters radio view for fixed radio interface 2:
root> radio slot 1 port 2
The following prompt appears:
radio[1/2]>
The following command enters radio view for an RMC in expansion slot 3:
root> radio slot 3 port 1
The following prompt appears:
radio[3/1]>
Configuring a Link Using the Quick Configuration Wizard
Figure 62, the user is configuring Radio 2.
phn-3965_006v002
Page 3-21