Cambium Networks PTP 820 Series User Manual page 337

Split-mount system
Hide thumbs Also See for PTP 820 Series:
Table of Contents

Advertisement

Chapter 5: Radio Configuration
Parameter
TX frames not compressed
due to other reasons
TX number of active flows
Number of active flows of
user selected flow type
Ethernet Port Counters
Port RX good bytes
Port RX good frames
Port TX total bytes
Port TX frames
Port TX idle bytes
Cut Through Counters
TX frames
Definition
Frames on the TX side that were not compressed for reasons other than
the use of exclusion rules.
The number of Header De-Duplication flows that are active on the TX
side.
Not supported.
The number of good bytes received on the port since the last time the
Radio Ethernet Interface counters were cleared.
The number of good frames received on the port since the last time the
Radio Ethernet Interface counters were cleared.
The number of bytes transmitted since the last time the Radio Ethernet
Interface counters were cleared.
The number of frames transmitted since the last time the Radio Ethernet
Interface counters were cleared.
The number of idle bytes transmitted since the last time the Radio
Ethernet Interface counters were cleared.
The number of frames that have been transmitted via Frame Cut-Through
since the last time the Radio Ethernet Interface counters were cleared.
phn-3965_006v002
Page 5-23
Viewing Header De-Duplication and Frame Cut-Through
Counters

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ptp 820fPtp 820g

Table of Contents