Chapter 9: TDM Services and Interfaces
Configuring Pseudowire TDM Services Manually
For PTP 820F and PTP 820G, you can configure up to 16 TDM pseudowire services per unit.
Note
Once a profile, tunnel, or bundle has been assigned to a service, you cannot modify that profile,
tunnel, or bundle until you first disable the service.
This section includes:
•
Viewing Pseudowire TDM Services
•
Adding a Pseudowire TDM Service
•
Editing a Pseudowire TDM Service
•
Viewing the Status of a Pseudowire TDM Service
•
Deleting a Pseudowire TDM Service
Viewing Pseudowire TDM Services
To view all the pseudowire TDM services configured for a TDM card:
1
Select TDM > TDM PseudoWire > Advanced > Services. The PseudoWire Services page opens.
describes the pseudowire TDM service parameters.
Figure 335 PseudoWire Services Page
Configuring Advanced Pseudowire Parameters
phn-3965_006v002
Page 9-65
Table 109