Cambium Networks PTP 820 Series User Manual page 641

Chapter 11: Access Management and Security
Figure 385 FTP Parameters Page (Security Certificate Request)
12. In the Username field, enter the user name you configured in the SFTP server.
13. In the Password field, enter the password you configured in the SFTP server. If you did not configure a
password for your SFTP user, simply leave this field blank.
14. In the Path field, enter the directory path to which you are uploading the CSR. Enter the path relative to the
SFTP user's home directory, not the absolute path. To leave the path blank, enter //.
15. In the File Name field, enter the name you want to give to the exported CSR.
16. If the IP address family is configured to be IPv4, enter the IPv4 address of the PC or laptop you are using as
the SFTP server in the Server IP address field. See
Communications.
17. If the IP address family is configured to be IPv6, enter the IPv6 address of the PC or laptop you are using as
the SFTP server in the Server IPv6 address field. See
Communications.
18. Click Apply, then Close to save the FTP parameters and return to the Security Log Upload page.
19. Click Generate & Upload. The file is generated and uploaded.
The CSR Status field displays the status of any pending CSR generation and upload. Possible values are:
o
Ready – The default value, which appears when CSR generation and upload is in progress.
o
File-in-transfer – The upload operation is in progress.
o
Success – The file has been successfully uploaded.
o
Failure – The file was not successfully uploaded.
The CSR Percentage field displays the progress of any current CSR upload operation.
Downloading a Certificate
To download a certificate:
Configuring X.509 CSR Certificates and HTTPS
Defining the IP Protocol Version for Initiating
Defining the IP Protocol Version for Initiating
phn-3965_006v002
Page 11-37