Cambium Networks PTP 820 Series User Manual page 777

Chapter 16: Unit Management (CLI)
•
If the IP protocol selected in
following command:
root> platform configuration channel server set ip-address <server-ipv4>
directory <directory> filename <filename> username <username> password
<password>
•
If the IP protocol selected in
following command:
root> platform configuration channel server-ipv6 set ip-address <server-
ipv6> directory <directory> filename <filename> username <username>
password <password>
To set the file transfer protocol you want to use (FTP or SFTP), enter the following command:
root>platform configuration channel set protocol <ftp|sftp>
To display the FTP channel parameters for importing and exporting configuration files, enter one of the following
commands in root view:
root> platform configuration channel server show
root> platform configuration channel server-ipv6 show
Table 152 Configuration Management CLI Parameters
Parameter
Input Type
server-ipv4 Dotted
decimal
format.
server-ipv6 Eight groups
of four
hexadecimal
digits
separated by
colons.
directory Text String.
filename Text String.
username Text String.
platform management ip set ip-address-family
platform management ip set ip-address-family
Permitted
Values Description
Any valid IPv4 The IPv4 address of the PC or laptop you are using
address. as the FTP server.
Any valid IPv6 The IPv6 address of the PC or laptop you are using
address. as the FTP server.
The directory path to which you are exporting or
from which you are importing the configuration
file. Enter the path relative to the FTP user's home
directory, not the absolute path. To leave the path
blank, enter //.
The name of the file you are importing, or the
name you want to give the file you are exporting.
Note: You must add the suffix .zip to the file name.
Otherwise, the file import may fail. You can export
the file using any name, then add the suffix .zip
manually.
The user name you configured in the FTP server.
phn-3965_006v002
Page 16-19
Backing Up and Restoring Configurations (CLI)
is IPv4, enter the
is IPv6, enter the