Cambium Networks PTP 820 Series User Manual page 941

Chapter 20: Ethernet Protocols (CLI)
To assign a range of services to another MSTI, enter the following command in root view:
root> ethernet generalcfg instance-to-service-mapping set service sid
<sid> to <sid> instance-id <instance-id>
To display the service to MSTI mapping for a specific service, enter the following command in root view:
root> ethernet generalcfg instance-to-service-mapping show service sid
<sid>
To display the service to MSTI mapping for a range of services, enter the following command in root view:
root> ethernet generalcfg instance-to-service-mapping show service sid
<sid> to <sid>
Table 269 MSTP Service to MSTI Mapping CLI Parameters
Parameter Input Type
sid Number or
Range
instance-id Number
The following command assigns Service 1 to MSTI 2:
root> ethernet generalcfg instance-to-service-mapping set service sid 1
instance-id 2
The following command assigns Services 1 through 10 to MSTI 2:
root> ethernet generalcfg instance-to-service-mapping set service sid 1
to 10 instance-id 2
The following command displays the service to MSTI mapping for services 1 through 1000:
root> ethernet generalcfg instance-to-service-mapping show service sid 1
to 1000
Setting the Bridge Level Spanning Tree Parameters (CLI)
The bridge level spanning tree parameters determine most of the bridge MSTP parameters, including parameters
that are applied to all bridges when this bridge is acting as the root.
To set the CIST bridge priority, enter the following command in root view:
root> ethernet mstp set cist-bridge-priority <cist-bridge-priority>
To set the CIST hold time, enter the following command in root view:
root> ethernet mstp set cist-bridge-hold-time <cist-bridge-hold-time>
To set the CIST maximum age, enter the following command in root view:
root> ethernet mstp set cist-bridge-max-age <cist-bridge-max-age>
To set the CIST forward delay, enter the following command in root view:
Permitted Values Description
Any Ethernet The service ID.
service or range of
services configured
in the unit.
The MSTI to which you want to map the
1-16, 4095
service.
phn-3965_006v002
Page 20-18
Configuring MSTP (CLI)