Cambium Networks PTP 820 Series User Manual page 947

Chapter 20: Ethernet Protocols (CLI)
Parameter Input Type
cist-port-mac- Variable
enabled
The following command sets the CIST port priority for Ethernet port 2 to 192:
root> ethernet mstp set interface eth slot 1 port 2 cist-port-priority
192
The following command sets the CIST port priority for HSB protection group 1 to 192:
root> ethernet mstp set group rp1 cist-port-priority 192
The following command sets the CIST path cost for Ethernet port 1 to 20,000:
root> ethernet mstp set interface eth slot 1 port 1 cist-path-cost 20000
The following command sets the CIST path cost for LAG 1 to 20,000:
root> ethernet mstp set group lag1 cist-path-cost 20000
The following command sets radio interface 1 to be an Edge port in the CIST:
root> ethernet mstp set interface radio slot 3 port 1 cist-port-admin-
edge true
The following command sets HSB protection group 1 to be an Edge port in the CIST:
root> ethernet mstp set group rp1 cist-port-admin-edge true
The following command displays the CIST parameters of radio interface 2:
root> ethernet mstp show-cist-port-attributes interface radio slot 1 port
2
The following command displays the CIST parameters of LAG 1:
root> ethernet mstp show-cist-port-attributes group lag1
Configuring and Viewing the MSTI Port Parameters (CLI)
To set the port priority for an MSTI and port, enter the following command in root view:
Permitted Values Description
forceTrue
forceTrue
forceFalse connected to a point-to-point LAN,
auto regardless of any indications to the contrary
that are generated by the MAC entity.
forceFalse
connected to a non-point-to-point LAN,
regardless of any indications to the contrary
that are generated by the MAC entity.
auto
to True
to-point or full-duplex LAN. The MAC
Enabled parameter is set to
MAC is connected to a non-point-to-point
and half-duplex LAN.
phn-3965_006v002
Page 20-24
– The MAC is treated as if it is
–The MAC is treated as if it is
– The MAC Enabled parameter is set
if the MAC is connected to a point-
False
Configuring MSTP (CLI)
if the