Cambium Networks PTP 820 Series User Manual page 770

Chapter 16: Unit Management (CLI)
Configuring a Software Download (CLI)
You can download software using HTTP, HTTPS, FTP, or SFTP.
When downloading software via HTTP or HTTPS, the PTP 820F or PTP 820G functions as the server, and you can
download the software directly to the PTP 820F or PTP 820G unit.
Note
HTTP and HTTPS software download is only supported using the Web EMS. For instructions, see
Downloading and Installing Software.
When downloading software, the IDU functions as an FTP or SFTP client. You must install FTP or SFTP server
software on the PC or laptop you are using to perform the software upgrade. For details, see
Internal Ports for FTP or SFTP
To set the file transfer protocol you want to use (FTP or SFTP), enter the following command:
root> platform software download version protocol <ftp|sftp>
If the IP protocol selected in
command:
root> platform software download channel server set server-ip <server-
ipv4> directory <directory> username <username> password <password>
If the IP protocol selected in
command:
root> platform software download channel server-ipv6 set server-ip
<server-ipv6> directory <directory> username <username> password
<password>
To display the software download channel configuration, enter one of the following commands:
(CLI).
platform management ip set ip-address-family
platform management ip set ip-address-family
phn-3965_006v002
Page 16-12
Upgrading the Software (CLI)
Configuring the
is IPv4, enter the following
is IPv6, enter the following