Cambium Networks PTP 820 Series User Manual page 956

Chapter 20: Ethernet Protocols (CLI)
•
– The internal index associated with the unit's destination LLDP MAC address.
LLDP DA Index
•
LLDP DA – The unit's destination LLDP MAC address.
To display local port parameters, as transmitted by the LLDP agent, enter the following command in root view:
root> ethernet lldp local-port-show
The following information is displayed:
•
Interface type/slot/port
•
Port ID Subtype – The type of encoding used to identify the port in LLDP transmissions. In this release, this
parameter is always set to MAC Address.
•
– The port's MAC address.
Port ID
•
– A text string that describes the port. In this release, this parameter is always set to ethPort.
Description
To display the local unit's management information per port, enter the following command in root view:
root> ethernet lldp mng-addr-table-show
The following information is displayed:
•
Interface type/slot/port
•
Dest Mac Address – Defines the MAC address associated with the port for purposes of LLDP transmissions.
•
Mng Address subType
Management Address. In this release, only IpV4 is supported.
•
Management Address
•
Mng Address Tx Enable
In this release, the Management Address is always sent.
– The port type, slot number, and port number.
– The port type, slot number, and port number.
– Defines the type of the management address identifier encoding used for the
– The unit's IP address.
– Indicates whether the unit's Management Address is transmitted with LLDPDUs.
phn-3965_006v002
Page 20-33
Configuring LLDP (CLI)