Cambium Networks PTP 820 Series User Manual page 506

Chapter 8: Ethernet Protocols
Table 95 LLDP Statistics
Parameter
Last Change Time
Inserts
Deletes
Drops
Ageouts
To display statistics about LLDP transmissions and transmission errors:
1. Select Ethernet > Protocols > LLDP > Advanced > Statistic > Port TX. The LLDP Port TX Statistic page opens.
Figure 290 LLDP Port TX Statistic Page
Table 96 describes the statistics in the LLDP Port TX Statistic page.
Table 96 LLDP Port TX Statistics
Definition
The time of the most recent change in the remote unit, as reported via
LLDP.
The number of times the information from the remote system has
changed.
The number of times the information from the remote system has been
deleted.
Reserved for future use.
The number of times the information from the remote system has been
deleted from the local unit's database because the information's TTL has
expired.
The RX Ageouts counter in the Port RX page is similar to this counter, but
is for specific ports rather than the entire unit.
phn-3965_006v002
Page 8-51
Configuring LLDP