Cambium Networks PTP 820 Series User Manual page 389

Chapter 6: Ethernet Services and Interfaces
Note
Optionally, you can select from a list of pre-defined service point options in the Pre defined options
field at the top of the
remaining service point parameters according to the system-defined parameters. However, you can
manually change these parameter values. The pre-defined options are customized to the type of
service to which you are adding the service point.
7. Click Apply, then Close.
Editing a Service Point
To edit a service point:
1. Select Ethernet > Services. The Ethernet Services page opens
2. Select the relevant service in the Ethernet Services Configuration table.
3. Click Service Points. The Ethernet Service Points page opens
4. Select the relevant service point in the Ethernet Services Points – General SP Attributes table.
5. Click Edit. The Ethernet Service Points– Edit page opens. The Ethernet Service Points – Edit page is similar to
the Ethernet Service Points - Add page
the Add Service Point page, except Service Point ID, Service Point Type, and the General SP Attributes.
6. Edit the service point attributes, as described in
7. Click Apply, then Close.
Deleting a Service Point
You can only delete a service point with an Attached Interface Type of Bundle-C or Bundle-S if no VLANs are
attached to the service point. See Attaching VLANs.
To delete a service point:
1. Select Ethernet > Services. The Ethernet Services page opens
2. Select the relevant service in the Ethernet Services Configuration table.
3. Click Service Points. The Ethernet Service Points page opens
4. Select the relevant service point in the Ethernet Services Points – General SP Attributes table.
5. Click Delete. The service point is deleted.
Attaching VLANs
When the Attached Interface Type for a service point is set to Bundle-C or Bundle-S, you can add multiple C-VLANs
to the service point.
To add multiple C-VLANs:
1. Select Ethernet > Services. The Ethernet Services page opens
Ethernet Service Points - Add
(Figure 195). You can edit any parameter that can be configured in
Table 62, Table
phn-3965_006v002
Page 6-18
Configuring Ethernet Service(s)
page. The system automatically populates the
(Figure 189).
(Figure 192).
64, and Table 65.
(Figure 189).
(Figure 192).
(Figure 189).