Cambium Networks PTP 820 Series User Manual page 755

Chapter 15: Configuration Guide (CLI)
Parameter Input Type
port Number
The following example creates a 1+1 HSB protection group with Group ID 1. Radio interface 1 will be the active
radio carrier.
root> radio protection create group 1 radio 1 port 1 radio 1 port 2 type
1-plus-1-HSB
2 Configure the active radio carrier and perform a copy-to-mate command to ensure that the radios in the
HSB pair have the same configuration. See
3 Optionally, you can enable revertive mode so that following a switchover, the system initiates a revertive
protection switchover back to the original receiver once proper link and/or equipment conditions are
restored. See Revertive Mode
Configuring 1+1 HSB with Space Diversity (CLI)
To configure 1+1 HSB protection with Space Diversity, you must perform the following steps:
1 Create a Multi-Carrier ABC group with no members, in Admin state Disable. For instructions, see
Configuring a Multi-Carrier ABC Group
2 Enable protection for the Multi-Carrier ABC group by entering the following command in Multi-Carrier ABC
group view:
multi-carrier-abc group-id[1]> protection set enable
3 Create a 1+1 HSB-SD protection group by entering the following command in root view. Radio interface 1
will automatically be the active radio carrier:
root> radio protection create group 1 radio 1 port 1 radio 1 port 2 type
1-plus-1-HSB-SD
4 Configure the active radio carrier and perform a copy-to-mate command to ensure that the radios in the
HSB pair have the same configuration. See
5 When you have finished configuring the 1+1 HSB group, unmute both radio carriers on both sides of the
link. See .
6 Optionally, you can enable revertive mode so that following a switchover, the system initiates a revertive
protection switchover back to the original receiver once proper link and/or equipment conditions are
restored. See Revertive Mode
7 Add the 1+1 HSB-SD group to the Multi-Carrier ABC group by entering the following command in Multi-
Carrier ABC group view:
multi-carrier-abc group-id[1]> attach-group group-id 1 type 1-plus-1-HSB-
SD channel-id 1
Permitted Values Description
1-2 The interface you want to add to the protection
group.
Copying Configuration to Mate
(CLI).
(CLI).
Copying Configuration to Mate
(CLI).
phn-3965_006v002
Page 15-24
Configuring HSB Radio Protection (CLI)
(CLI).
(CLI).